HEAD Speed Sinner racket: the specs known so far

Specs and prices last checked on 17 November 2026.

The HEAD Speed Sinner is a Speed MP with three changes on the spec sheet: more weight, a balance point nearer the head and a thinner beam. HEAD’s US store lists it at $299, and as of 17 November 2026 the page marks it out of stock with a “coming soon” label.

Everything below is read from published specifications and retailer data. Nothing here comes from hitting with the frame.

Spec table: Speed Sinner against three Speed siblings

All four frames share a 100 in² (645 cm²) head and a 27 in (685 mm) length. Prices are HEAD’s US store prices in US dollars, as of 17 November 2026.

Model Unstrung weight (g) Balance (mm from butt) Beam (mm) String pattern Price (USD)
Speed Sinner 304 324 22 16×19 299
Speed MP 2026 300 320 23 16×19 259
Speed Pro 2026 310 310 23 18×20 269
Speed MP UL 2026 265 330 23 16×19 249

The Sinner figures come from HEAD’s Speed Sinner page: 304 g, 324 mm (0.7 in head-light) and a 645 cm² head, with a 22 mm thin beam and a 16×19 pattern. The Speed MP is listed at $259 and 300 g, and its 320 mm balance and 23 mm beam come from retailer spec sheets. The Speed Pro is $269 with a 310 mm balance and a 310 g, 23 mm, 18×20 build. The Speed MP UL is 265 g with a 330 mm balance at $249, and it shares the MP’s beam and string pattern.

What changed from the Speed MP

The Tennisnerd report puts it as 4 g heavier, balanced 4 mm closer to the head and 1 mm thinner in the beam than the MP. In relative terms that is 4 / 300 = 1.3% more mass and 1 / 23 = 4.3% less beam depth.

The price gap is $299 minus $259, so $40, which is 15.4% on top of the MP’s $259. For that, the buyer gets a frame sitting between the MP and the Pro on weight (304 g against 300 g and 310 g) while keeping the MP’s open 16×19 pattern, a combination none of the other three frames in the table offers.

The thin beam is not new to the Speed family. Tennis Warehouse lists the older Graphene XT Speed MP with a 22 mm constant beam and a 315 g strung weight, so the Sinner edition reads as a return to a slimmer profile rather than a fresh shape.

Balance in millimetres

Balance points are quoted from the butt cap, which makes them awkward to compare. Measured against the frame’s centre point (685 mm / 2 = 342.5 mm), the head-light offsets are 18.5 mm for the Speed Sinner (342.5 − 324), 22.5 mm for the MP (342.5 − 320), 32.5 mm for the Pro (342.5 − 310) and 12.5 mm for the MP UL (342.5 − 330). The chart shows that calculation.

Head-light offset from the frame centre (larger = more head-light). Offset from 342.5 mm centre: Speed MP UL 12.5, Speed Sinner 18.5, Speed MP 22.5, Speed Pro 32.5 (mm)
Head-light offset from the frame centre (larger = more head-light)
Source: Calculated from HEAD balance points (330, 324, 320, 310 mm) and a 685 mm frame length (centre 342.5 mm)

A smaller offset means the weight sits further toward the hoop. HEAD’s own labels of 0.7 in, 1 in, 1.3 in and 0.5 in head-light match these offsets once rounded.

How close is it to Sinner’s own frame?

HEAD says the racket brings players “as close as possible” to Jannik Sinner’s setup. Tennisnerd notes that Tennis Warehouse claims the same specs and mould, while HEAD’s own wording is more careful.

The frame Sinner uses is a pro stock model known as the HEAD TGT 301.4, painted to resemble the current Speed MP and unavailable to the public. Perfect Tennis says that mould was used for the retail Graphene Touch Speed MP, on sale around 2016, and that HEAD’s pro room added silicone and lead to his frame. Tennisnerd adds that his match frames are reported to be customised heavier than 304 g, so the retail edition is a base rather than a finished tour setup.

Reported figures for his strung frame are roughly 325 g with a balance near 33.3 cm, though Tennis Companion labels the weight as rumoured. The same kind of reporting has him stringing HEAD Hawk Touch polyester at around 61 lb (28 kg). A racket database lists a recommended range of 48 to 57 lb for the Speed MP, which is about 22 to 26 kg, so a buyer copying his tension would be going above the listed window.

What the spec sheet can and can’t tell a buyer

Weight, balance, beam and pattern describe the frame’s mass and geometry. They predict that a 22 mm beam gives a lower-profile cross-section, and HEAD’s own copy says thin beams give more control and ball feel but less power, needing faster swing speeds.

Two numbers decide how a frame feels in motion: swingweight (resistance to rotation about a point near the handle, in kg·cm²) and stiffness (RA, where a higher number means a stiffer frame). For the siblings, the published figures are a Tennis Warehouse lab swingweight of 328 and a stiffness of 61 RA for the Speed Pro, and a listed 329 swingweight for the MP at 60 RA. Extra mass and a balance point nearer the head both tend to raise swingweight, so the Sinner edition probably sits above the MP, but that is an inference from the geometry.

What we could not confirm: HEAD has published no swingweight, stiffness, strung weight or on-sale date for the Speed Sinner, and its US page lists a dollar price only, with no EUR price available as of 17 November 2026. Tennisnerd also records that HEAD has not yet published swingweight, stiffness, length or strung weight, which matters because those four figures are the ones that separate frames with near-identical headline specs.

Who it suits

On paper, the Speed Sinner is aimed at players who already like the Speed MP’s open string bed and want more mass and a slimmer beam. HEAD tags it “All Rounder”, “Highweight” and “Mid-Size”, and warns that highweight frames require strength and technique and suit slower swings less well.

That points to advanced club players with fast, full swings who want spin from the 16×19 pattern without moving up to the Pro’s tighter 18×20. Players who value easy handling are better served by the MP UL’s 265 g or the MP’s 300 g, and anyone weighing the extra $40 should demo the frame, since the missing swingweight and stiffness figures are exactly what a demo reveals.

Sources

Header image: illustration, AI-generated.

Leave a Comment